Autowatch Ghost II Immobiliser Review
Autowatch Ghost is the next-generation in car security. It is undetectable by thieves and cannot be started without either a unique pin code or app authorization.
The system is based on the CAN Data network of your vehicle and is silent, which means it can't be detected using common diagnostic tools or radio signals. It also does not require any circuit cuts to be made before installing.
What is a Ghost Immobiliser?
Ghost Immobilisers help protect your vehicle from theft by stopping it from starting until a unique pin code is entered. It is a device that can be used in a variety of vehicles, and unlike traditional immobilisers, it does not require a key or fob to operate. It is also very difficult to bypass or hack and operates silently, meaning a thief would need to be quick to get away without being noticed.
It guards against signal jamming, spoofing and key cloning, all of which that thieves have used to gain access to cars with standard immobilisers. The device also stops thieves from stealing your keys by fishing through your letterbox or breaking inside your home to steal the remote control. It could even prevent them from taking away your joy and pride when they manage to gain access to the key because it stops them from starting the vehicle unless they enter a code first.
Unlike passive immobilisers that require an ignition key or fob to be activated, a ghost immobiliser is designed to be completely sealed inside the engine and is connected directly to the vehicle's CAN data circuit. The system generates a pin code when you press buttons on the steering wheel or the console of your car. You must enter this code before your engine can begin. The system can be set to a service mode, which allows your vehicle to start and drive for short periods without requiring an PIN code. However the service mode will be shut down according to speed and time.
Due to the technology used this device is not able to be hacked or bypassed even when using advanced technology like codes grabbing or RF scanning devices. It is also impossible to disable using a regular vehicle immobiliser because it doesn't send a signal like a standard one and works only by connecting directly to the CAN data circuit.
TASSA (Tracking and Aftermarket Security System Association) has now approved the Ghost immobiliser to be an insurance approved product due to its advanced technology and its ease of installation. We are a proud TASSA approved Ghost installer and can fit the device in your vehicle to be used for insurance purposes.
What is the process of a Ghost Immobiliser work?
Immobilisers prevent your car from starting if the wrong remote or key is used. This is achieved by sending a code to your vehicle's ECU (Engine Control Unit) and if this code is sent from the incorrect fob or key the ECU will not recognize it, and consequently your car will not start. This is the reason it's essential to ensure that your vehicle is equipped with an immobiliser from a recognised and reputable specialist.
At MotorGuard, MotorGuard is the Midlands most trusted vehicle security specialists and installers. We provide an Autowatch Ghost immobiliser fitting service for a wide selection of modern cars and you can be sure that your pride and joy is safe from thieves.
The Autowatch Ghost immobiliser is one of the world's first aftermarket CAN bus immobiliser systems and protects your vehicle against key-cloning, hacking, and theft. It's designed to go undetected by thieves since it doesn't use LED indicators or key fobs. It can be hidden within the wiring of your vehicle to ensure that no extra hardware is needed.
Once it is installed the system is connected to the CAN system of your vehicle and allows you to design a an exclusive disarm sequence that includes your own pin code which you have to enter in order to drive the vehicle. The pin code can be up to 20 presses long, to ensure security. If you have forgotten your pin code or if the button has broken, there is a secure emergency code that can be used. This will let your vehicle to start over again.
It's because the Ghost immobiliser cannot be manipulated or hacked that it is such a deterrent to thieves. It is also TASSA (Tracking and Aftermarket Security Systems Association) which can reduce your car insurance cost.
As technology continues to advance Ghost immobilisers are getting more sophisticated. We suggest that you speak with an Autowatch Ghost fitter as soon as you can in order to safeguard your pride and joy. If you're purchasing a new vehicle, or looking to upgrade your vehicle, you can rely on us to provide you with a quality service, so you can take pleasure in your joy and pride for many years to be.
Is Ghost Immobiliser compatible with my car?
The Ghost is the world's first aftermarket CAN bus immobiliser to offer complete protection against modern vehicle theft. It safeguards against key hacking, cloning, ECU swapping, and more. The new TASSA verified Ghost-II systems also provide vehicle marking and linking to the International Security Register enabling your insurance company to verify that you have a genuine Ghost system installed.
Our Ghost Immobiliser prevents thieves from starting your engine by requiring a unique pin code sequence to be entered or the presence of your smartphone with our Autowatch application installed before it can be used. It functions as a PIN for a bank card, and makes it impossible to drive away with your joy and pride without entering the correct pin or phone. Our Ghost Immobiliser System is integrated into the CAN Data Network so there is no wire cutting to be cut and the system works silently. It is undetectable to thieves and is not detected by sophisticated scans using RF or code-grabbing techniques that other systems employ.
The Autowatch app can then be used to link the Ghost to your smartphone. This allows you to enter an indefinite 'Service or valet mode, which disables the ghost for up to 30 minutes as you give your vehicle for service or transport. Then, it is linked to your smartphone using the Autowatch app to allow you to enter the temporary "Service or Valet" mode that deactivates the ghost for up to 30 minutes as you hand over your vehicle for repair or transportation.
It's not a surprise that the number stolen vehicles has increased significantly. This is due to the level of personalisation and modifications that are employed in modern vehicles and the fact that many of us drive older vehicles. Many of them are expensive and scarce vehicles which can take months to repair after being stolen so ensuring your pride and joy isn't in danger of becoming the next target is crucial. Ghost immobilisers are a low-cost investment that can keep your vehicle safe and can even be used to get the vehicle back in the event of theft.
Does ghost immobiliser review by cutting principle?
Ghost immobilisers work by blocking your vehicle's engine from starting unless an additional PIN is entered along with your key fob. This prevents thieves from cloning your keys to steal into your car's system and could encourage them to leave your vehicle to themselves.
Once installed, your ghost immobiliser creates a unique pincode of up to twenty digits using the buttons on your vehicle (steering wheels or centre consoles, or door panels). This code must be entered in order to start your vehicle. This code sequence is required each time you wish to drive your car, just like a password or PIN on a credit card. The code can be reset by entering a series of numbers into the Ghost app on your smartphone.
The Autowatch Ghost II CAN immobiliser also has two deactivation options for valet and service, which allows you to temporarily start your vehicle with no access code as a key fob - whilst it is in the garage or with a valet parking company. The immobiliser will be activated when your vehicle is placed in a garage.
The Ghost is different from other security systems on the market. It doesn't have any LED indicators, and it works completely silently using the CAN data network of your vehicle. It's also not vulnerable to the same types of circuit cuts as many other security gadgets, since it does not use radio waves.
This means that it can be set up in a way that is discrete and invisible and therefore, is impossible for thieves to find and identify. It is also not detectable by sophisticated scanning tools and technology that grabs codes, which are commonly employed to identify or disable security devices.
The Ghost is a premium modern, high-tech CAN bus immobiliser that provides the best protection against key cloning relay theft and car hacking. It's simple to install and is undetectable by thieves. It also is not able to be deactivated with simple wire cutting. This makes it an essential item for anyone who wants to secure their vehicle.